Arial
Wingdings
Monotype Sorts
Symbol
SDDM
HP LaserJet Professional CP1020
Display
Dimensions Dimensions
Use to add a single vertical dimension with dimension text between extension lines.
Vis_PE.chm!#27489 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
`1Choose the displayed precision for the dimension. Precision
`#Choose the units for the dimension. Units Use Drawing Page's Units;-Feet-Inch (1'-0"");-Feet (1.00');-Inches;-Feet (1.00ft);-Miles;.Millimeters;.Centimeters;.Meters;.Kilometers
`4Choose whether or not to display unit abbreviations. Units Display Don't Show Units;Show Units
Both `)Choose which extension lines are visible. Extension Lines ` Both;End only;Begin only;Neither
Q(-DT `8Choose the angle at which the dimension line is rotated. Q(-DT Angle
Precision && Units... Prop.LPrec.Invisible
Set As Page Default ThePage!User.LPrec Prop.LPrec User.LPrecVal ThePage!User.LUnits Prop.LUnits User.LUnitsVal ThePage!User.ShowUnits Prop.ShowUnits User.ShowUnitsVal
Revert To Page Default Prop.LPrec User.LPrecVal Prop.LUnits User.LUnitsVal Prop.ShowUnits User.ShowUnitsVal
_Reset Text Position Controls.X2 Scratch.X1 Controls.Y2 Height
Extension Lines... Prop.LPrec.Invisible
Change Dimension Height
Reposition Text
Use Drawing Page's Units;-Feet-Inch (1'-0");-Feet (1.00');-Inches;-Feet (1.00ft);-Miles;.Millimeters;.Centimeters;.Meters;.Kilometers
0.00
Use Drawing Page's Units
Don't Show Units
25.00
@
`.0;0FT 0IN;0.0FT;0IN;0FT;0MI;0 MM;0 CM;0 M;0 KM
`"Linear Precision Formatting String
`#0=Dwg, 1=Arch, 2=Dec Ft, 3+ = other
Vertical,Use,add,single,dimension,text,between,extension,lines,Dimensioning,Engineering,linear,angular,radial,measurements,dimensional,analysis
Use to add a single horizontal dimension with dimension text between extension lines.
Vis_PE.chm!#27478 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
`8Choose the angle at which the dimension line is rotated. Angle
Horizontal,Use,add,single,dimension,text,between,extension,lines,Dimensioning,Engineering,linear,angular,radial,measurements,dimensional,analysis
Co&lor Schemes... `'Set the color scheme for this document.
Black & White
Machining Machining
Bezels Bezels
.Millimeters
Show Units
0.0
0 MM
0.0u
19.1mm
44.5mm
146.0mm
51.5mm
135.5mm
@@Ht*t
@@Ht*t @@Ht*t
5.0mm
84.0mm
184.2mm
48.0mm
-Inches
0IN
0.8in
32.0mm
?@Ht*t
?@Ht*t ä?@Ht*t
0.9in
101.5mm
0.000
0.000u
3.125in
90.0mm
30.0mm
120.0mm
17.0mm
42.0mm
25.0mm
27.0mm
20.0mm
77.0mm
45.0mm
164.0mm
Guide
TheDoc
Dimension
Gesture Format
Front Panel
SchemeName
Visio 90
Connector
Visio 00
Visio 01
Visio 02
Visio 03
Visio 10
Visio 11
Visio 12
Visio 13
Visio 20
Visio 21
Visio 22
Visio 23
Visio 50
Visio 51
Visio 52
Visio 53
Visio 70
Visio 80
Basic
Basic Shadow
Vertical
LPrec
LUnits
ShowUnits
Extensions
Angle
AntiScale
LUnitsFactor
FormatString
LengthText
Length
LPFString
LPrecInd
LPrecVal
LUnitsInd
LUnitsVal
ShowUnitsInd
ShowUnitsVal
FeetInch
Feet
Inch
InchPrec
LocEndX
LocEndY
visObjectType
DrawingUnitFactor
visKeywords
visVersion
Horizontal
Vertical.14
Vertical.15
Horizontal.6
Left Side Panel
Right Side Panel
Horizontal.15
Horizontal.16
Horizontal.17
Horizontal.24
Vertical.27
Vertical.28
Vertical.29
Horizontal.5
Vertical.19
Vertical.20
Vertical.21
Vertical.22
Horizontal.23
Horizontal.9
Vertical.10
Horizontal.18
Horizontal.20
Horizontal.22
Vertical.26
Horizontal.27